fzt1053a document number: ds33185 rev. 3 - 2 1 of 5 www.diodes.com september 2011 ? diodes incorporated fzt1053a a product line o f diodes incorporated 75v npn silicon planar high voltage transistor in sot-223 features and benefits ? bv ceo > 75v ? maximum continuous current i c = 4.5a ? 10a pulse current ? high gain holds up h fe > 300 @ i c =1a ? very low equivalent on-resistance; r ce(sat) = 78m? at 4.5a ? ?green? component, lead free finish / rohs compliant (note 1) ? qualified to aec-q101 standards for high reliability mechanical data ? case: sot223 ? case material: molded plastic, ?green? molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: matte tin finish ? weight: 0.112 grams (approximate) ordering information (note 1) part number marking reel size (inches) tape width (mm) quantity per reel FZT1053ATA fzt1053a 7 12 1,000 notes: 1. diodes, inc. defines ?green? products as those whic h are rohs compliant and contain no halogens or antimony compounds . all applicable rohs exemptions applied. further information about diodes inc. ?s ?green? policy can be found on our website at http://www.diod es.com marking information fzt1053a = product type marking code equivalent circuit top view pin out top view sot223 fzt 1053a
fzt1053a document number: ds33185 rev. 3 - 2 2 of 5 www.diodes.com september 2011 ? diodes incorporated fzt1053a a product line o f diodes incorporated maximum ratings @t a = 25c unless otherwise specified characteristic symbol value unit collector-base voltage v cbo 150 v collector-emitter voltage v ceo 75 v emitter-base voltage v ebo 7.5 v continuous collector current i c 4.5 a base current i b 500 ma peak pulse current (note 2) i cm 10 a thermal characteristics @t a = 25c unless otherwise specified characteristic symbol value unit collector power dissipation (note 2) p d 2.5 w thermal resistance, junction to ambient (note 2) r ja 50 c/w thermal resistance, junction to leads (note 3) r jl 10.88 c/w operating and storage temperature range t j, t stg -55 to +150 c electrical characteristics @t a = 25c unless otherwise specified characteristic symbol min typ. max unit test condition collector-base breakdown voltage bv cbo 150 250 - v i c = 100a collector-emitter breakdown voltage bv ces 150 250 - v i c = 100a collector-emitter breakdown voltage (note 4) bv ceo 75 100 - v i c = 10ma collector-emitter breakdown voltage bv cev 150 250 - v i c = 100a, v eb = 1v emitter-base breakdown voltage bv ebo 7.5 8.8 - v i e = 100a collector cutoff current i cbo - 0.9 10 na v cb = 120v collector cutoff current i ces - 1.5 10 na v ces = 120v emitter cutoff current i ebo - 0.3 10 na v eb = 4v dc current transfer static ratio (note 4) h fe 270 440 - - i c = 10ma, v ce = 2v 300 450 1200 i c = 0.5a, v ce = 2v 300 450 - i c = 1a, v ce = 2v 40 60 - i c = 4.5a, v ce = 2v - 20 - i c = 10a, v ce = 2v collector-emitter saturation voltage (note 4) v ce(sat) - 21 30 mv i c = 0.2a, i b = 20ma - 55 75 i c = 0.5a, i b = 20ma - 150 200 i c = 1a, i b = 10ma - 160 210 i c = 2a, i b = 100ma - 350 440 i c = 4.5a, i b = 200ma base-emitter saturation voltage (note 4) v be ( sat ) - 900 1000 mv i c = 3a, i b = 100ma base-emitter turn-on voltage (note 4) v be ( on ) - 825 950 mv i c = 3a, v ce = 2v transitional frequency (note 4) f t - 140 - mhz i c = 50ma, v ce = 10v, f = 100mhz output capacitance c obo - 21 30 pf v cb = 10v, f = 1mhz, switching time t on - 162 - ns v cc = 50v, i c = 2a, i b1 = i b2 = 20ma t off - 900 - ns notes: 2. for the device mounted on 50mm x 50mm fr4 pcb with hi gh coverage of single sided 1oz copper, in still air conditions. 3. thermal resistance from junction to solder-point (at the end of the drain lead) 4. measured under pulsed conditions. pulse width = 300 s. duty cycle 2%.
fzt1053a document number: ds33185 rev. 3 - 2 3 of 5 www.diodes.com september 2011 ? diodes incorporated fzt1053a a product line o f diodes incorporated electrical characteristics
fzt1053a document number: ds33185 rev. 3 - 2 4 of 5 www.diodes.com september 2011 ? diodes incorporated fzt1053a a product line o f diodes incorporated package outline dimensions suggested pad layout sot223 dim min max typ a 1.55 1.65 1.60 a1 0.010 0.15 0.05 b1 2.90 3.10 3.00 b2 0.60 0.80 0.70 c 0.20 0.30 0.25 d 6.45 6.55 6.50 e 3.45 3.55 3.50 e1 6.90 7.10 7.00 e ? ? 4.60 e1 ? ? 2.30 l 0.85 1.05 0.95 q 0.84 0.94 0.89 all dimensions in mm dimensions value (in mm) x1 3.3 x2 1.2 y1 1.6 y2 1.6 c1 6.4 c2 2.3 a1 a x2 c1 c2 x1 y2 y1
fzt1053a document number: ds33185 rev. 3 - 2 5 of 5 www.diodes.com september 2011 ? diodes incorporated fzt1053a a product line o f diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhancements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support dev ice or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2011, diodes incorporated www.diodes.com
|
